Automatic System of
Filling Multi Corking and Labelling
Specific for Oil
AUTOMATIC ROTATING MONOBLOC WITH BOTTLES MANUALLY LOADING SYSTEM FOR FILLING, CAPPING, CAPSULING AND LABELLING
Mod. RTV300-5 ASPX FOR OIL
This machine is suitable for the small-medium OIL (and other still liquids) producers.
By pressing the General START button, the operator will initiate the various processing steps which provide for automatic and simultaneous filling and capping (bottles manually loading system on the automatic rotating table with 5 workstations ). The capsuling and labeling process is initiated by pressing the Specific START button (manual positioning of the bottles).
!!! IMPORTANT !!! A single operator is able to operate the machine.
!!! IMPORTANT !!! Equipment specially designed for tthose customers who require several changes in format as the operations of variation are very fast and very cheap (change in plastic rings). Therefore the machine is also suitable for the production of small batches at low cost.
!! IMPORTANT !!! To guarantee a high quality level of the process RT300-5 ASPX is equipped as standard with a insufflation system of antioxidant gas (Nitrogen) PRE-CAPPING (standard).
!! IMPORTANT !!! The supply system happens by gravity directly from the storage tank or from a buffer tank placed between the tank and the machine.
Transfer pumps aren’t needed in oreder to better guarantee the HIGH quality of your product.
For the same reason it does not happen CENTRIFUGATION, HEATING, AND VAACUM SUCTION of the product
MACHINERY PARTICULARLY APPRECIATED BY ORGANIC WINE AND OIL PRODUCERS
FILLING MACHINE (glass bottles)
Composed by n° 1 patented stainless steel AISI 304 volumetric dispenser complete with filling head. It’s pneumatically controlled, easily dismantled, cleanable and sterilized
Filling system adjustable from 0,25 to 1 Lt (optional until lt 1,5-3)
Liquid supply must be happen by downfall throw direct connection from the main tank.
Nitrogen (or other inert gases) input at the end of the filling phase.
After the filling, the nitrogen cleans the filling head in order to dry perfectly the bottle.
CAPPING MACHINE (SCREW CAPS)
Four rollers capping machine for aluminium screw caps complete with closing head and downfall head system for format bottles change
Capping head : n.1
Type of caps : aluminium screw capsule with drip catcher 31,5 x 24/ 35×24 / on request anti-filling DOP caps
Capping head : 4 rollers
Caps supplier : duct ( 50 caps )
Type of bottles : glass round bottles/square (subject to our previous control)
Electric head with automatic movement for the application of thermo-retractable capsules with capsules manually positionning on the bottles and Start button (double control, manual cycle)
1. the operating temperature
2. the contact time between the capsule and the heat source
Voltage: 220/240 monoph.
Absorption: 0,20 Kw
Capsules diam.: max mm. 40
Capsules lenght: max mm. 65 (mm. 55 per bordolese)
Bottles height: from mm. 150 to 360
SEMIAUTOMATIC LABELLING MACHINE (ROUND BOTTLES)
Application of front/back label on round bottle
Optional on request :
Pneumatic print system with quick drying ink buffer (12 letters on 4 lines)
Thermal transfer print system on 2 lines
1. An additional format bottles kit (composed by 5 plastic rings)
2. Spare kits for parts subject to wear (seals, valves, micro-switch, filter regulator)
3. Anti-oxidant gas insufflation system (nitrogen) pre-filling
4. Air evacuation pre-capping
5. Bottle Magnum 1,5 filling system (double pump)
6. Automatic caps supplier with electric hopper
7. Bottles blowing and cleaning system with air or nitrogen or filtered air with 2 spouts manually drived applied as appendix on the left side. Equipped with stainless steel AISI 304 basin and structure .
8. Automatic leveler
9. Pneumatic print system with quick drying ink buffer (12 letters on 4 lines)
10. Thermal transfer print system
11. Compressor PROFESSIONAL, tank capacity 100 litri.
THE MACHINE IS ENTIRELY PRODUCED AT OUR FACTORY
Sturdy structure in AISI 304 stainless steel carpentry
Dimensions: mm. 1750x730x2000 h
Weight : Kg 250
Workstations : 5 +2
Filling capacity : from lt 0,25 to lt. 1 adjustable ( OPTIONAL lt.1,5 -3 )
Air pressure : Bar 6
Production capacity : 400/500 filled and capped bottles per hour
Air consumption : 230 lt/min.
Filling system : volumteric with atmospheric pressure. Not isobaric.
Air connection: ¼ “
Usable liquids : OIL,still wine, water, beer fermented in bottle, liqueurs, fruit juices
Wine connection : 1 “
Type of bottles : glass round bottles, square bottles, shaped bottles (subject to our pevious control)
Operating temperature : from 16°c to 25°
Process control : electro-pneumatic